Wellness Vanities

Bespoke bathroom cabinetry, designed around the architecture, functionality and material language of each space.

ZAUS Custom Bathroom Vanities provide complete made-to-measure bathroom cabinetry packages for powder rooms, ensuites, family bathrooms and master suites.

Each vanity is developed around the project drawings, bathroom dimensions and design intent, allowing cabinetry, storage, cabinet fronts, finishes, hardware, basins, worktops, mirror cabinetry and integrated lighting to be coordinated as one complete joinery solution.

From compact wall-mounted vanities and streamlined single-basin arrangements through to expansive double vanities, full-width cabinetry and integrated mirror storage, each package can be configured according to the available space, functional requirements, architectural language and project budget.

Made-to-Measure Vanity Cabinetry

Unlike predetermined vanity units, ZAUS bathroom vanities are manufactured around the dimensions and architectural conditions of the individual bathroom.

Cabinet widths and heights, drawer arrangements, cupboard storage, basin positions and surrounding interfaces can be developed according to the documented bathroom layout.

Vanity configurations can include:

• Wall-mounted vanities

• Floor-standing vanities

• Single-basin arrangements

• Double-basin arrangements

• Full-width bathroom cabinetry

• Integrated drawer storage

• Cupboard storage

• Open shelving and display niches

• Full-height supplementary storage

• Integrated mirror cabinetry

• Coordinated side and tall cabinets

This allows the vanity to respond directly to the bathroom rather than requiring the available space to conform to predetermined cabinet sizes.

Cabinetry & Construction

Bathroom cabinetry can be specified using a range of manufacturer-supported engineered board and timber-based materials, allowing the construction method to be selected according to the intended application and project requirements.

Available construction options include selected:

• Decorative and melamine-faced boards

• Engineered particleboard

• OSB-based board

• Multi-layer and plywood-based board

• Timber-veneer substrates

• Selected natural timber components

ENF-grade board options are available across selected manufacturer specifications.

Wall-mounted configurations can also incorporate dedicated concealed cabinet-hanging systems where supported by the selected cabinetry specification.

Final substrate, board thickness, edge treatment and construction requirements should be selected with consideration for the bathroom environment and intended application.

Vanity Fronts & Finishes

Vanity fronts can be selected independently of the internal cabinet construction, allowing the cabinetry to coordinate with the broader architectural and material palette of the bathroom.

Available manufacturer-supported systems include:

• Decorative cabinet fronts

• PET fronts in selected matt and gloss finishes

• UV-finished fronts

• Vacuum-formed and profiled doors

• Painted cabinetry

• Natural timber veneer

• Selected natural timber applications

• Integrated handle profiles

• Architectural handles and pulls

The available palette extends from architectural whites, warm neutrals and greys through to darker finishes, timber-look surfaces, natural veneer and more detailed painted or profiled designs.

Not every finish or cabinet-front system is suitable for every bathroom application. Final material, surface treatment and edge detailing should therefore be confirmed against the selected specification and intended installation environment.

Vanity Planning & Configuration

Vanity planning can be developed around the way the bathroom is intended to function.

The position of basins, drawers, cupboards, plumbing and surrounding fixtures can be considered together to create a practical internal layout without compromising the external design.

Depending on the project, the vanity can be configured around:

• Centred basin arrangements

• Offset basin arrangements

• Single or double basins

• Full-width worktops

• Drawer-dominant storage

• Combined drawer and cupboard storage

• Open shelving

• Display niches

• Supplementary tall storage

• Integrated mirror cabinetry

This allows storage and basin placement to be developed specifically for the available wall space and bathroom layout.

Storage & Organisation

Internal storage can be configured according to the requirements of the individual vanity.

Configurations can incorporate:

• Full-width drawers

• Internal drawers

• Cupboards

• Adjustable shelving

• Compartmented storage

• Open storage

• Toiletry organisation

• Towel storage

• Supplementary tall cabinetry

Where drawers are positioned around basin wastes and plumbing, the internal cabinetry can be coordinated with the selected basin and waste arrangement before manufacture.

This allows the exterior composition to remain clean while maintaining practical everyday storage.

Basin Coordination

Custom bathroom vanities can be developed around the selected basin configuration rather than limiting the project to a predetermined vanity-and-basin combination.

Depending on the design, the cabinetry can be coordinated with:

• Integrated vanity tops

• Above-counter basins

• Inset basins

• Undermount basins where appropriate

• Single-basin arrangements

• Double-basin arrangements

• Offset basin configurations

Basin dimensions, waste position, tap-ware location and required clearances should be confirmed before final cabinetry manufacture.

ZAUS Custom Bathroom Vanities can also be coordinated with selected products from the broader Vanity Basin collection where an established basin or integrated vanity-top solution is preferred.

Stone & Vanity-Top Coordination

Vanity cabinetry can be coordinated with the intended stone, engineered surface or alternative vanity-top specification.

This allows cabinet dimensions, basin openings, tap-ware positions, edge profiles, splash-backs and supporting requirements to be considered alongside the selected surface material.

Where the vanity top forms part of the ZAUS procurement scope, the cabinetry and surface packages can be coordinated together to reduce interface issues between separate suppliers.

Integrated Mirror Cabinetry

Bathroom joinery can be coordinated with mirror cabinetry to combine storage and reflective surfaces within the overall vanity composition.

Available manufacturer-supported configurations can include:

• Integrated mirror cabinet doors

• Aluminium-framed mirror doors

• Multi-door mirror cabinetry

• Illuminated mirror systems

• Integrated mirror lighting

• Selected demister-compatible configurations

Mirror cabinetry can be coordinated with the width, alignment and material language of the vanity below to create a more resolved bathroom composition.

Where lighting, demisters or other electrical components are incorporated, the final system and electrical requirements should be confirmed before manufacture and coordinated with the relevant trades.

Supplementary Bathroom Storage

Where additional storage is required, the vanity can be coordinated with supplementary bathroom cabinetry.

Depending on the available space, this can include:

• Tall storage cabinets

• Wall-mounted cabinets

• Open shelving

• Linen storage

• Display niches

• Integrated mirror storage

• Recessed or wall-aligned cabinetry

These elements can use the same or complementary finishes as the vanity to establish a consistent material language throughout the bathroom.

Joinery Hardware

Vanity cabinetry can be specified with concealed hinges, drawer runners, soft-close mechanisms, cabinet-hanging systems and specialised functional hardware according to the required performance and project specification.

Selected systems from Blum, Hettich and DTC are available within supported manufacturing specifications.

Hardware selection can therefore be coordinated according to cabinet type, loading requirements, opening mechanism, functionality and budget rather than applying one hardware system universally across every vanity.

Integrated Joinery Lighting

Lighting can be incorporated into selected vanity, mirror and storage cabinetry to provide both functional illumination and architectural emphasis.

Depending on the selected design, available systems can include:

• Integrated mirror lighting

• Shelf lighting

• Illuminated glass shelving

• Cabinet lighting

• Drawer lighting

• Integrated LED profiles

• Touch controls

• Hand-wave sensor controls

• Door-activated switching

• Motion-sensing controls

Integrating lighting during design and manufacture allows channels, profiles, wiring pathways and switching requirements to be considered as part of the cabinetry rather than added after installation.

Tap-ware & Plumbing Coordination

Vanity design should be considered alongside the selected basin, tapware, waste and plumbing arrangement.

Depending on the bathroom design, the vanity can be coordinated with:

• Bench-mounted basin mixers

• Wall-mounted basin tapware

• Basin wastes

• Bottle traps where exposed

• Concealed plumbing

• Hot and cold-water services

Tap-ware position, basin dimensions, drawer clearances and plumbing penetrations should be considered together before manufacture.

This is particularly important where wall-mounted tap-ware, integrated vanity tops or drawer storage around the basin waste form part of the design.

Finishes

Finish selections can be coordinated across vanity cabinetry, mirror storage and supplementary bathroom joinery.

Available manufacturer-supported finish families include:

Decorative Board — architectural solid colours, neutrals and timber-look finishes.

PET & UV — selected matt, tactile and gloss surface options.

Vacuum-Formed — solid, timber-look and profiled decorative cabinet fronts.

Painted — selected architectural colours across flat and profiled designs.

Timber & Veneer — natural timber veneer and selected timber applications for architectural joinery.

Aluminium & Mirror — aluminium-framed mirror systems with selected frame finishes and compatible mirror configurations.

Final finish availability is dependent on the selected material, cabinet-front system, manufacturer specification and intended bathroom application.

Coordinated Bathroom Package

Custom bathroom vanities can be coordinated alongside the broader ZAUS Bathware range to create a more complete bathroom specification.

Vanity Cabinetry • Vanity Basins • Toilets & Sanitaryware • Baths • Tapware • Shower Systems • Shower Screens • Mirrors & Shaving Cabinets • Accessories • Floor, Basin & Bath Wastes

Where appropriate, cabinetry dimensions, basin selection, tapware, mirror systems and associated finishes can be considered together rather than specifying each component independently.

Whole-of-Project Joinery Coordination

Bathroom vanities can also be coordinated alongside other ZAUS custom joinery packages to establish a consistent material and detailing language throughout the project.

Kitchen Joinery • Wardrobes & Dressing Rooms • Bathroom Vanities • Laundry Joinery • Entertainment Units • Studies • Bars • Display Cabinetry • Architectural Wall Panelling • Custom Residential Joinery

Where appropriate, cabinet fronts, finishes, handles and detailing can be coordinated across multiple rooms while still selecting materials appropriate to each application.

Project Development & Coordination

ZAUS develops each custom bathroom vanity package from the project documentation and selected specification.

The process can incorporate:

Review Project Drawings • Develop Vanity Layout • Select Construction & Finishes • Configure Storage • Select Basin & Vanity Top • Coordinate Tapware & Plumbing • Select Hardware • Coordinate Mirror Cabinetry • Integrate Lighting • Finalise Shop Drawings • Manufacture • Deliver • Coordinate Installation

This allows the cabinetry, sanitaryware, plumbing interfaces, finishes and manufacturing requirements to be considered before production begins.

Applications

Powder Rooms • Ensuites • Family Bathrooms • Master Ensuites • Custom Homes • Luxury Residences • Apartments • Townhouses • Multi-Residential Developments • Renovations • Architect-Designed Homes

Designed for the Bathroom. Manufactured to the Project.

ZAUS coordinates custom bathroom vanities as complete architectural joinery packages rather than standalone vanity units.

Define the Space • Develop the Vanity Layout • Select the Construction • Select Fronts & Finishes • Configure Storage • Coordinate Basin & Vanity Top • Select Hardware • Coordinate Tapware & Plumbing • Integrate Mirror Cabinetry & Lighting • Manufacture & Deliver

The result is a made-to-measure bathroom joinery package developed around the architecture, functionality, material specification and requirements of the individual project.